Posts Tagged “Motorized dish”

I’ve just added support for motorized dishes. In the dropdown box with all the satellites, you’ll find at the bottom an item called True South / True North and then various makes of satellite motors (Moteck SG2100, Satcontrol SM3D12 / SM3D22, PanSat PM900S, PowerTech DG240 and Stab HH90, Stab HH100, Stab HH120). You’ll need the True South (if you live North of the equator) or True North (if you live South of the equator) marking in order to setup your motor. When you choose the satellite motor, you’ll get the declination angle and also the dish elevation. If you want me to add different makes of satellite motors, just let me know. When installing a motorized dish, the key is that the pole is absolutely vertical. If it’s not then the motor can’t track the satellites along the clarke belt – you wouldn’t receive the outer satellites. If your motor and receiver supports USALS then the installation becomes a bit easier as you can plug in your latitude and longitude into the receiver and the motor is rotated to the correct satellite automatically. All you would need to do is then fine-tune the installation. Without USALS, you need to point the motorized dish directly at True South/True North (the line on the map) and then take it from there. I hope to post a full installation guide here soon.

Comments 20 Comments »