Canada · LEGACY DISH GEOMETRY
Bell TV 82W / 91W dish alignment
Even though 82°W service has been switched off, you can still use your existing Bell TV 82°W / 91°W dish to receive the channels at 91°W.
Feed arrangement: 82W (n/a), 91W
Your location
Latitude: °
Longitude: °
Satellite Data
Dish Setup Data
...Azimuth (true)
Azimuth angle relative to true north
°
Azimuth (mag.)
Azimuth angle relative to magnetic north. Use this with a compass.
°
Elevation
Angle between the dish and the horizontal plane. Set this on the dish mount.
°
LNB Skew
Rotation direction when standing behind the dish. Zero when LNB is vertical.
°
PERFECT RECEPTION
Check the sight line to every feed
For trouble-free reception, each feed must have a clear line of sight. Check for trees, buildings and other obstructions in the satellite direction beforehand on the map, or on site with the official DishPointer Pro 2 app.
Your Bell TV 82W / 91W configuration
Use this only for the dual feed setup. If you have a circular single-feed dish, then use the settings for the 91°W satellite.
- Service status
- Legacy dish geometry
- Alignment target
- 86.5°W
- Feed positions
- 82W (n/a), 91W
- Dish skew scale
- Neutral: 90°. Clockwise rotation increases the scale reading, viewed from behind the dish.
Quick setup guide
- Aim the dish along the alignment line shown on the map.
- Set elevation and dish skew on your dish scale to the values shown by DishPointer.
- Check for obstructions with the DishPointer Pro 2 app. Each active feed must have a clear line of sight.
- Peak the signal for the centered satellite, then verify or fine-tune the others.
