Europe · TÉLÉSAT · CANAL+ Polska
13E / 19.2E Multi-LNB dish alignment
Align your dual-LNB 19.2°E / 13°E dish using 13°E as the center target. Enter your address to calculate azimuth, elevation and dish skew for this two-position European setup.
Feed arrangement: 19.2E, 13E (center)
Your location
Latitude: °
Longitude: °
Satellite Data
Dish Setup Data
...Azimuth (true)
Azimuth angle relative to true north
°
Azimuth (mag.)
Azimuth angle relative to magnetic north. Use this with a compass.
°
Elevation
Angle between the dish and the horizontal plane. Set this on the dish mount.
°
LNB Skew
Rotation direction when standing behind the dish. Zero when LNB is vertical.
°
PERFECT RECEPTION
Check the sight line to every feed
For trouble-free reception, each feed must have a clear line of sight. Check for trees, buildings and other obstructions in the satellite direction beforehand on the map, or on site with the official DishPointer Pro 2 app.
Your 13E / 19.2E Multi-LNB configuration
This preset assumes the center feed points to 13°E, with the other feed at 19.2°E.
- Service status
- Multi-LNB alignment
- Alignment target
- 13°E
- Feed positions
- 19.2E, 13E (center)
- Dish skew scale
- Neutral: 0°. Clockwise rotation increases the scale reading, viewed from behind the dish.
Quick setup guide
- Aim the dish along the alignment line shown on the map.
- Set elevation and dish skew on your dish scale to the values shown by DishPointer.
- Check for obstructions with the DishPointer Pro 2 app. Each active feed must have a clear line of sight.
- Peak the signal for the centered satellite, then verify or fine-tune the others.
