Europe · A1 SAT TV · Total TV
19.2E / 16E / 13E Multi-LNB dish alignment
Align a three-feed dish for 19.2°E, 16°E and 13°E using 16°E as the center target. Enter your installation address to calculate azimuth, elevation and dish skew for this European multi-LNB combination.
Feed arrangement: 13E, 16E (center), 19.2E
Your location
Latitude: °
Longitude: °
Satellite Data
Dish Setup Data
...Azimuth (true)
Azimuth angle relative to true north
°
Azimuth (mag.)
Azimuth angle relative to magnetic north. Use this with a compass.
°
Elevation
Angle between the dish and the horizontal plane. Set this on the dish mount.
°
LNB Skew
Rotation direction when standing behind the dish. Zero when LNB is vertical.
°
PERFECT RECEPTION
Check the sight line to every feed
For trouble-free reception, each feed must have a clear line of sight. Check for trees, buildings and other obstructions in the satellite direction beforehand on the map, or on site with the official DishPointer Pro 2 app.
Your 19.2E / 16E / 13E Multi-LNB configuration
This three-feed arrangement uses 16°E as the center target. Peak that feed first, then verify the 13°E and 19.2°E feeds.
- Service status
- Multi-LNB alignment
- Alignment target
- 16°E
- Feed positions
- 13E, 16E (center), 19.2E
- Dish skew scale
- Neutral: 0°. Clockwise rotation increases the scale reading, viewed from behind the dish.
Quick setup guide
- Aim the dish along the alignment line shown on the map.
- Set elevation and dish skew on your dish scale to the values shown by DishPointer.
- Check for obstructions with the DishPointer Pro 2 app. Each active feed must have a clear line of sight.
- Peak the signal for the centered satellite, then verify or fine-tune the others.
